There are a few steps you should take to properly install your 5 slot charter tactical web belt buckle. The first step is to attach the keeper loop to the strap. Once you’ve finished that, you should flip the buckle right side up. The tongue should be facing the wrong direction. It should be able to fit into the slot and move freely. To do this, simply measure the length of your strap and the length of the metal loop at the top of the buckle.
Once the web has been properly installed, the buckle assembly will snap into place. The built-up portion 32 engages the abutment portion 31 of the belt. This buckle will not slide around because of the slots. The web-adjustment bar is mounted about pin 10 to prevent lateral movement. Then, thread the webbing through the second slot. Once you have completed the process, you can place the buckle about 30 cm (12 inches) from the left waist slot.
The buckle’s five slots are designed to allow the free end of the belt to fit inside. The strait ends of the strap are secured by the buckle’s inwardly-projecting pins. To close the buckle, just pull the webbing through the first slot and the second slot. Now, you’re ready to wear your new belt! This buckle will be perfect for your next adventure.
Excellent Gift for Anyone
The strap webbing is made of high-quality GRIP6 material, which is etched with tiny grooves on its surface. These grooves help the buckle grasp the strap tightly, and the free end has been uniformly melted so it will not fray. Then, you’re ready to go. You can wear it at any time. The buckle is an excellent gift for anyone. Once you’ve purchased your new belt buckle, you’ll be glad you bought it. You’ll be wearing it for years to come!
The first step is to thread the webbing through the first slot. The second step is to pass the webbing through the second slot. You should position the buckle 45 cm (18 inches) from the left waist slot. If the webbing is loose, the buckle will need to be pushed into place on the other side of the belt. After you have placed the webbing through the two slots, you should close the belt.
Once you’ve attached the belt, the second step is to put the buckle on your webbing. The first step is to thread the webbing through the second slot. Once you’ve secured the strap, you can attach the buckle to the other end of the webbing. This will prevent the buckle from falling off the belt. You can then slip the other end of the webbing through the other open slot.
Automatic Buckle
To use the 5-slot buckle, insert the webbing through the first slot. Then, pass the other end of the webbing through the second slot. Then, insert the remaining end of the webbing through the other two slots. Once the webbing is securely attached to the buckle, you can pull the belt tight between the two slots. When the strap is tight, the buckle will automatically close.
Secondly, you should place the buckle on the webbing. You can either tuck it behind the web of your belt or tie it over your waist. To do so, you should place the webbing through the first slot and the second one. If you’re using the 5-slot web belt buckle, the other end should be open. If you want to tuck the webbing behind the buckle, you’ll need to thread the second side of the buckle.
Then, you can insert the webbing through the second slot. After that, you should pull the excess webbing through the other slot. Then, you can secure the belt by tying the keeper loop and the belt loops on your pants. Similarly, you should remove the belt by pulling the prong out. In this case, you’ll need to pull the other end of the webbing through the last slot.
